Adjusters Timing & Adjusting Service Manual for Singer 201 & 1200 Sewing Machine

Description

68-Page
Adjusters Manual
for
SINGER SEWING MACHINES
201-1, 201-2, 201-3, 201-4 and 1200-1
*********
Timing and Adjusting Instructions
for
Servicing, Adjusting and Repairing
Singer Sewing Machines
of Classes
201 and 1200
*********
Instruction Manual.  (Photo 03)
This is NOT a standard "Xerox"
copy of the Singer manual!
This manual is professionally printed
on the same heavy-weight brilliant-white paper as the
original Singer manual!
Brilliant-white heavy-weight paper
.  (photo 19)
Description:
This listing is for a professional reproduction of the Singer Manufacturing Co. “Adjuster's Manual for Singer Machines 201-1, 201-2, 201-3, 201-4 and 1200-1 Lock Stitch Reversible Feed Sewing Machines.”
The manual also includes instructions for the Singer P.H. and B.R. Sewing Machine motors as well as for the Singer Bakelite speed controller pedal.
This is NOT a standard "Xerox" copy of the Singer manual! It is professionally printed on the same brilliant-white heavy-weight chrome paper as the original Singer manual! It is super clean, the text and the illustrations are very sharp, and it is nearly identical in size and in paper type to the original Singer manual.
Unlike the original 80 year old manual that has become frail, brittle, mildewed, stained and yellowed after so many years, this manual looks like an original Singer manual that has been preserved in NEW CONDITION!
Just like the Singer company printed their manual on their in-house printing press, we printed this manual on our in-house printing press. This manual may also serve you for the next 80 years.
In fact, if we didn't tell you,
you could not tell the difference
between this manual and the
original manual!
This full-size 68-page Instruction manual is complete and very clean with no "black dots," smudges, stains, or any other imperfections. No pages are missing, dirty, or damaged. The manual includes descriptions and illustrations which will show you how to do the following:
·
Description
·
Motors for machines 201-2 and 201-3
·
Singer P.H. Motors for machine 201-2
·
Singer B.R. Motors for machine 201-3
·
Insure correct demonstration of the machine
·
Electrical connections for machines 201-2 and 201-3
·
Machine 201-2, Singer P.H. motor, Singerlight and controller
·
Singerlight leads
·
Controller leads
·
Machine 201-3, Singer B.R. motor, Singerlight and controller
·
Singerlight leads
·
Controller leads
·
Using the Bakelite controller
·
Using for foot control
·
Using for knee control
·
Causes of trouble with machines of class 201
·
Causes of low speed or failure to run
·
Heavy or gummed lubricant
·
Too much presser foot pressure
·
Machine Binds
·
Motor causes of trouble with machines 201-2 and 201-3
·
Electric current not turned on
·
Loose or broken electrical connections
·
Motor not suited for electric supply
·
Dirty commutator
·
Carbon brushes not making contact
·
Armature binding
·
Machine 201-2
·
Machine 201-3
·
Causes of binding machine 201-2 and 201-3
·
Machine 201-2 only
·
Machine 201-3 only
·
Broken armature wires
·
Controller not properly adjusted
·
Inspect electrical connections, machine 201-2
·
Three-pin terminal
·
Motor, machine 201-2
·
Singerlight, machine 201-2
·
Remove Singerlight shade, machine 201-2
·
Inspect Singerlight connections, machine 201-2
·
Reassemble the Singerlight, machine 201-2
·
Replace Singerlight, machine 201-2
·
Remove Singerlight leads from the machine arm, machine 201-2
·
Replace the Singerlight leads, machine 201-2
·
Replace the three-pin terminal, machine 201-2
·
Instructions for machines 201-2 and 201-3
·
Tree-pin terminal plug
·
Singerlight fails to light, machines 201-2 and 201-3
·
Remove and replace the bulb, machines 201-2 and 201-3
·
Remove the motor, machine 201-2
·
Disassemble the motor, machine 201-2
·
Remove motor cover
·
Remove brushes, machine 201-2
·
Remove armature, machine 201-2
·
Inspect and clean the armature, machine 201-2
·
Remove the field core with coils, machine 201-2
·
Clean brushes and brush tubes, machine 201-2
·
Inspect wire connections to brush tubes, machine 201-2
·
Remove and replace brush tubes, machine 201-2
·
Remove and replace insulating bushings, machine 201-2
·
Reassemble the motor, machine 201-2
·
Reassemble the field core with coils
·
Replace armature, machine 201-2
·
Replace brushes, machine 201-2
·
Attach motor and three-pin terminal, machine 201-2
·
Lubricating the Motor,
machine 201-2
·
Remove and replace the balance wheel
, machine 201-2
·
Remove and replace the Textolite gear and shock-absorbing spring
, machine 201-2
·
Inspect electrical connections, machine 201-3
·
Tree-pin terminal, machine 201-3
·
Motor, machine 201-3
·
Singerlight, machine 201-3
·
Singerlight fails to light, machine 201-3
·
Remove and replace the bulb, machine 201-3
·
Tree-pin terminal, machine 201-3
·
Electrical outlet plug, machine 201-3
·
Remove the motor, machine 201-3
·
Disassemble the motor, machine 201-3
·
Remove the pulley, machine 201-3
·
Remove pulley end cover, machine 201-3
·
Remove the brushes, machine 201-3
·
Remove the armature, machine 201-3
·
Inspect and clean the armature, machine 201-3
·
Remove the field core shield, machine 201-3
·
Inspect wire connections to brush tubes, machine 201-3
·
Clean brushes and brush tubes, machine 201-3
·
Reassemble the motor, machine 201-3
·
Replace commutator end cover, machine 201-3
·
Replace field core shield, machine 201-3
·
Replace armature, machine 201-3
·
Replace pulley end cover, machine 201-3
·
Replace brushes, machine 201-3
·
Replace pulley, machine 201-3
·
Attach motor, Singerlight and three-pin terminal, machine 201-3
·
Adjust belt tension, machine 201-3
·
Lubricate the motor, machine 201-3
·
Singer Bakelite carbon controller, machines 201-2 and 201-3
·
The
S
inger Bakelite controller
·
Motor fails to start
·
Inspect the carbon resistance unit of the controller
·
Treadle controller
·
Convertible foot and knee controller
·
Motor fails to operate at all speeds
·
Emergency adjustment of carbon resistance unit
·
Motor fails to stop
·
Instructions for machines 201-1, 201-2, 201-3, 201-4 and 1200-1
·
Remove and replace the rotating hook bobbin case
·
Remove and replace the feed dog
·
Remove and replace the rotating hook bobbin case position plate
·
Remove and replace the rotating hook
·
Time the rotating hook
·
Set the needle bar at the correct height
·
Remove and replace the rotating hook shaft and bevel gear
·
Remove and replace the rotating hook driving shaft and bevel gears
·
Raise or lower the feed dog
·
Adjust the position of the feed dog lengthwise
·
Adjust the position of the feed dog centrally
·
Remove and disassemble the graduated tension
·
Reassemble and replace the graduated tension
·
Adjust the bobbin winder
·
Adjust the presser bar
·
Remove and replace the presser bar
·
Remove and replace the needle bar
·
Remove and replace the feed connecting rod
·
Remove and replace the feed forked connection and feed regulator
·
Remove and replace the upright arm shaft and gears
·
Remove and replace the horizontal arm shaft, bushing, gear, cam, eccentric
·
O
iling the machine
Here are photos of some of the pages from the manual. You can see the
superb quality of the print, photos, diagrams, and the paper itself.
P.H. motor, Singer-light and controller
. (Photo 04)
Light fixture assembly. (Photo 07)
Three-pin terminal
. (Photo 08)
Motor assembly. (Photo 10)
Electrical connections
. (Photo 12)
Speed controller
. (Photo 15)
Timing the rotating hook
. (Photo 17)
These instructions are fairly detailed and utilize illustrations to make it easy to understand and carry out the instructions. In most cases a simple tool, like a screwdriver, is needed to do the task. And, once you know what to do, you may be able to perform the timing or the adjustment in just a couple of minutes!
These Instructions are a
MUST
for every owner
of a Singer
201-1, 201-2, 201-3, 201-4, 1200-1
Sewing Machine!
Instruction Manual.  (Photo 01)
Note for users of “Singer Adjusters Manual for Class 201”
:
Most people who use this manual also use an additional manual which includes service information that is directly applicable to Class 201 machines.
This additional manual is:
“
Illustrated List of Parts for Class 201
”
(available at our eBay listing #
191706647363
)
The additional “Illustrated List of Parts Manual” includes illustrations of every single component, screw, nut, spring, plate, rod, hinge, handle, arm, etc. Every internal part of the motor is shown. Every internal part of the speed control pedal is shown. All the components and parts of every single accessory are shown. All these parts and components are illustrated in the proper size with respect to their actual size and with respect to each other.
This “
Illustrated List of Parts for Class 201
” manual is available at our eBay listing #
191706647363
.
SHIPPING POLICY
:
The shipping cost stated above is ONLY for the 50
US
states. Inquire about shipping cost to
Canada
and other International locations.
All orders are shipped next business day after payment is received and cleared.
FEEDBACK POLICY
:
We guarantee to leave all customers positive feedback the next day after positive feedback is received.
PAYMENT NOTICE
:
We accept PayPal. Please note that we ship ONLY to confirmed PayPal addresses.
Return Authorization
:
You may return your entire purchase within 7 days of receipt. Please request a Return Authorization prior to returning the items. The items must be returned with all the accessories and in the original box, with all packing materials. Please insure the shipment against lose and damage. We will refund your original purchase price, less shipping and handling fees.
IMPORTANT NOTE
eBay 5-Star Rating System
:
Due to eBay's new Star rating system and it's lack of explanation and clarity, I would like to try to give you an insight as to how it affects our business. You would think that a 4 star rating would be good as eBay says. Not So! Anything less than a 5 star rating on all categories might as well be a Negative feedback score. If you are not completely satisfied with any transaction and believe it to be our fault, your fault or nobodies fault, contact us and we will take care of the problem.
Here is Our promise
:
1.   We inventory and have in stock every item that we list for sale.
2.   We ship every item within 24 to 48 hours.
3.   We offer the fastest shipping in the industry, and pack each item securely.
4.   We offer superior customer support and quick response to your eBay message or  email.
5.   We strive to achieve 100% customer satisfaction.