Adjusters, Timing, Adjusting, Service Manual for Singer 27 & 28 Sewing Machines

Description

Adjusters Manual
for
SINGER 27 and 28
SEWING MACHINES
*********
Timing and Adjusting Instructions
for
Singer 27 and 28 Vibrating Shuttle
Sewing Machines
*********
Instruction Manual.  (Photo 01)
This is NOT a standard "Xerox"
copy of the Singer manual!
This manual is professionally printed
on the same heavy-weight brilliant-white paper as the
original Singer manual!
Heavy-weight, brilliant-white paper
.  (photo 19)
Description:
This listing is for a professional reproduction of the Singer Manufacturing Co. manual for Timing and Adjusting Singer 27 and 28 sewing machines. This is NOT a standard "Xerox" copy of the Singer manual! It is professionally printed on the same heavy-weight brilliant-white paper as the original Singer manual! It is super clean, the text and the illustrations are very sharp, and it is nearly identical in size and in paper type to the original Singer manual.
Unlike the original 99 year old manual that has become frail, brittle, mildewed, stained and yellowed after so many years, this manual looks like an original Singer manual that has been preserved in NEW CONDITION!
Just like the Singer company printed their manual on their in-house printing press, we printed this manual on our in-house printing press. This manual may also serve you for the next 99 years.
In fact, if we didn't tell you,
you could not tell the difference
between this manual and the
original manual!
This 26-page instruction manual is complete and very clean with no "black dots," smudges, stains, or any other imperfections. No pages are missing, dirty, or damaged. The manual includes descriptions and illustrations which will show you how to do the following:

Remove and install arm shaft

Remove, replace, and adjust arm rock shaft

Remove and replace balance wheel

Locate and correct binding of moving parts

Increase pressure of bobbin winder

Remove and replace clamp stop motion mechanism

Set correct height and position of feed dogs

Remove and replace feed fork connections

Remove and replace feed regulator

Oil the machine and lubricate the motor

Set the correct height and location of the needle and needle bar

Set the correct height of the pressure bar

Set the correct location of the presser foot

Set the correct height and location of the shuttle and shuttle bobbin

Set the correct shuttle timing

Adjust the bobbin to wind evenly

Adjust stop-motion screw for winding the bobbin

Adjust the tension of the take up spring

“
Run-In” the machine
Here are photos of some of the pages from the manual. You can see the
superb quality of the print, photos, diagrams, and the paper itself.
Oil the machine
. (photo 03)
Forming lock stitch
. (photo 04)
Timing the shuttle
. (photo 06)
Needle thread tension mechanism
. (photo 07)
Remove and replace feed regulator. (photo 08)
These instructions are fairly detailed and utilize illustrations to make it easy to understand and carry out the instructions. In most cases a simple tool, like a screwdriver, is needed to do the task. And, once you know what to do, you may be able to perform the timing or the adjustment in just a couple of minutes!
These Instructions are a
MUST
for every owner
of a
Singer 27, 28 Machine!
Instruction Manual. (Photo 02)
Note for users of “Singer Adjusters Manual for Classes 27, 28”
:
Most people who use this manual also use an additional manual which includes service information that is directly applicable to Classes 27 and 28 machines.
This additional manual is:
“
Illustrated List of Parts for Classes 27, 27K, 28K
”
(available at our eBay listing #
202134539536
)
This additional “Illustrated List of Parts” manual include illustrations of every single component, screw, nut, spring, plate, rod, hinge, handle, arm, etc. Every internal part is shown. All the components and parts of every single accessory are shown. All these parts and components are illustrated in the proper size with respect to their actual size and with respect to each other.
The “
Illustrated List of Parts for Classes 27, 27K, 28K
” manual is available at our eBay listing #
202134539536
.
SHIPPING POLICY
:
The shipping cost stated above is ONLY for the 50
US
states. Inquire about shipping cost to
Canada
and other International locations.
All orders are shipped next business day after payment is received and cleared.
FEEDBACK POLICY
:
We guarantee to leave all customers positive feedback the next day after positive feedback is received.
PAYMENT NOTICE
:
We accept PayPal. Please note that we ship ONLY to confirmed PayPal addresses.
Return Authorization
:
You may return your entire purchase within 7 days of receipt. Please request a Return Authorization prior to returning the items. The items must be returned with all the accessories and in the original box, with all packing materials. Please insure the shipment against lose and damage. We will refund your original purchase price, less shipping and handling fees.
IMPORTANT NOTE
eBay 5-Star Rating System
:
Due to eBay's new Star rating system and it's lack of explanation and clarity, I would like to try to give you an insight as to how it affects our business. You would think that a 4 star rating would be good as eBay says. Not So! Anything less than a 5 star rating on all categories might as well be a Negative feedback score. If you are not completely satisfied with any transaction and believe it to be our fault, your fault or nobodies fault, contact us and we will take care of the problem.
Here is Our promise
:
1.   We inventory and have in stock every item that we list for sale.
2.   We ship every item within 24 to 48 hours.
3.   We offer the fastest shipping in the industry, and pack each item securely.
4.   We offer superior customer support and quick response to your eBay message or  email.
5.   We strive to achieve 100% customer satisfaction.
-----------------------------------------------------------------------------------------------